The Nigerite Small Solo Roofing Sheet is a compact, fire-resistant corrugated fibre-cement sheet made for high performance even in smaller roof spans. It offers the trusted strength and weather resilience of Nigerite’s Solo range, with a smaller profile that’s perfect for lightweight structures, sheds, or economical builds.

Key Features:

• Material: Fibre-cement (corrugated), which gives it both strength and non-combustible properties.
• Thickness: Around 3 mm, based on local listings
• Dimensions: Typical panel size is 63 cm width × 180 cm length per casting from vendor-spec data.
• Fire Resistant: Designed to minimize the risk of fire spread.
• Weather Resistant: Good performance under rain and heat, especially when correctly installed.
• Colour Options: May come in pre-mixed colours (red, brown, etc.) depending on batch and vendor.
• Manufacturer: Made by Nigerite Limited, a trusted local fiber-cement producer.

Usage / Installation Instructions:

1. Ensure correct framing: Use properly spaced purlins/trusses to support the smaller sheet.
2. Overlap correctly: Overlap side-laps and end-laps to ensure watertightness, even if sheet is compact.
3. Fastening: Use the recommended fasteners (e.g. nails or bolts with washers) through the corrugations.
4. Clean roof surface: After installation, remove leaves, debris, and anything that can clog drainage.
5. Storage: Store unused sheets flat and dry to avoid warping or cracking.

Ideal Applications:

• Small residential buildings or outbuildings (sheds, garages)
• Low-budget construction where full-size sheets are overkill
• Projects needing fire-resistant but low-profile roofing